Polyether polyol used for pipe insulation,the polyurethane foam are materials or combinations of materials wrapped around the pipe which retard the flow of heat energy.

 

Polyurethane foam helps maintain a warmer pipe temperature to avoid heat loss in pipes and prevent freezing or cracking in cold climates.

Pipe insulation reduces energy losses to a great extent and thereby reduce energy cost.

The insulation of pipes is one of the most commonly used materials in buildings and industrial structures, has a high impact on energy savings.

The thermal conductivity coefficient value of polyurethane foam is lower than other insulation materials such as wood, rock wool and polystyrene, thanks to the high closed cell amount of rigid polyurethane foams.

Therefore, the thermal insulation by rigid polyurethane foams is much higher than other insulation materials.

 

 

Functions of Rigid Foam Polyether polyol for Pipe Insulation serves three principal purposes:

 

1,Hot Insulation:the significant reduction in heat transfer of thermal energy to and from the surface of the piping system. So, piping insulation conserves energy.

2,Cold insulation:the prevention of moisture formation and collection on the surface of the piping system due to condensation on cold surfaces.

3,Personal Protection:the prevention of potentially injurious personnel contact with the surface of the exposed piping system.

BQ8017 is a kind of blend polyol of whole water system used in pipe insulation.

 

BQ8017 polyurethane pipe insulation has the features as bellow:

Water blown,

ozone depletion is 0, green;

excellent flow properties,

good density,

flow properties than ordinary pipe system well over 10% of the blowing agent;

excellent physical properties of the foam,

through the national resistance to creep;

no situation brittle foam shrinkage,

good adhesion with out pipe for protecting.

 

Typical Properties of the polyether polyol used for pipe insulation as bellow:

 

 

 

Avoid contact with skin and eyes.

Avoid inhalation of vapour or mist.

Keep away from sources of ignition - No smoking.

Take measures to prevent the build up of electrostatic charge.

 

 

The rigid polyurethane foam packed in galvanized steel drum; each drum is 200kg in net weight.

Pallet tank, box-type container, or car tank also can be accepted

Need pay attention to ventilation, coolness, and dryness, avoid sunlight and rain, and keep away from water and heat source,during the storage and transportation.

 

Polyether polyol used for pipe insulation,polyurethane used for pipe Insulation,pipe Insulation Polyurethane Systems,you can contact BEIQIAO to get more information.

http://www.bqnmt.com/