The 4-stations Automatic  Centrifugal Casting Machine is to fix the heating tube to the mold of the heating plate,and pour aluminum water into the centrifugal casting machine,relying on the centrifugal force brought by rotation to quickly shape the product.

4-Station Automatic Centrifugal Casting Machine

 

Product Advantsegs

 

Shortcomings of Traditional way of making heating plate:
Traditional Die casting machine:

 

1)Low efficiency (about 50 seconds/piece), high cost,

 

2)After the finished product is heated at high temperature, it is easy to bulge and reduce the life of the rice cooker.

 

Gravity casting process:
1)low efficiency and high cost.
2)low product quality

 

 

 Therefore, we made this new equipment - 4-stations Automatic Centrifugal Casting Machine. With it, the production efficiency can be increased to 5000pcs per day!!

 

Advantages of 4-Station Automatic Centrifugal Casting Machine:

1.Higher production capacity

2. Product qualification rate is as high as 99% (manipulator scoops water)

3. High degree of automation, using PLC control

4. Independent of human (You needn’t worry about frequent manual flow)

5.Two different molds can be produced at the same time.

 

Main Feature

 

Main features:

1. High production capacity: 5,000pcs/8hr, reducing production costs.

2. Product qualification rate is as high as 99%

3. PLC control, easy to operate, independent of human.

1、With the design of turntable and manipulator, four sets of hollow heating plates (200 ~ 1500W).

With different sizes, powers and weights can be produced at the same time.

2、High efficiency, less mold change time.

Four sets of heating plates of different sizes are produced at the same time.

And the production per day can reach 5000 PCs.

3.If the customer's product is single and the output is relatively large, we can customize it according to the customer's requirements.

Produce four sets of products of the same size.

And one shift output can reach 5000 PCs. (choose four models before customization, the same or different models)

4.According to the customer's existing mold design, only do small mold changes, do not need to have too much investment in the mold.

 

5.According to the customer's mold design, the design of associated ejector pin can be customized.

  It can reduce the time for operators to knock the thimble and improve the production efficiency of the 4-station Automatic Centrifugal Casting Machine.

 

6.One energy-saving electric melting and holding furnace produced by us can be used for two automatic centrifugal aluminum casting machines at the same time.

  The output of one furnace and two machine shifts can reach about 5000 PCs, which can save energy maximally.

http://www.davinci-machine.com/